Camlok™ CY Hinged Universal Plate Clamp

Camlok

CY1

$422.76

Minimum WLL

450 LBs

900 LBs

1350 LBs

Qty

Category: Below-the-Hook Attachment, Material Handling, Vertical Clamp

For lifting longer plates with two leg chain slings, turn to Camlok’s CY Hinged Universal Plate Clamp. These plate clamps can be used on materials up to a surface hardness of 300 Brinell (32HRc). Because of a swiveling hook ring feature, the CY Hinged Plate Clamp can be fitted to a steel plate in any position.

Can be used to lift a plate from the horizontal to vertical position and vice versa
Can turn a plate from the horizontal to vertical position
Sufficient clamping of the load is achieved by the special shape of the hook ring
Fitted with a cam-operated closing mechanism that can be replaced with a chain pull open/close mechanism
Because of the swiveling hook ring, clamps can be fitted to a steel plate in any position
Design factor 4:1

Product Code	Dimensions (in) *
Product Code	A	B	C	D	E	F	G	H	I
CY1	4.961	10.63	1.969	1.929	2.756	3.74	2.48	0.472	0.906
CY2	7.559	15.039	3.15	2.953	3.78	5.197	3.622	0.787	1.181
CY3	7.559	15.039	3.15	2.953	3.78	5.197	3.622	0.787	1.181

* Refer to product drawing abve

Product Code	Working Load Limit		Jaw Capacity	Safe Loads for 2 Clamps (lbs)
Product Code	Minimum (lbs)	Maximum (lbs)	Jaw Capacity	0-30°	30-90°	90-120°
CY1	450	2,200	0 to 3/4	4,400	2,200	1,100
CY2	900	4,400	0 to 1-1/4	8,800	4,400	2,200
CY3	1,350	6,600	0 to 1-1/4	13,200	6,600	3,300