Camlok™ TTG Horizontal Girder Clamp
$2,289.00
Camlok™ TTG Horizontal Girder Clamp
$2,289.00
Minimum WLL:
200 LBs
Please enter correct zip code
Camlok TTG Horizontal Girder Clamps are designed to lift and transport structural steel beams in the horizontal position. These products are fitted with a Camlok spring-operated safety lock for extra peace-of-mind and safety.
- Designed to lift and transport structural steel beams in the horizontal position
- Fitted with a Camlok spring-operated safety lock and is operated by pulling the lock upwards
- For short beams, a single clamp can be used. Long beams should be lifted using 2 clamps attached to opposite beam flanges
- Maximum hardness of material to lift should not exceed 300 Brinell (32HRc)
- Chart Note: *Not Stocked
- Design factor 4:1
| Product Code | Working Load Limit | Plate (in) | Dimensions (in) * | Weight (lbs) | ||||||
| Minimum (lbs) | Maximum (lbs) | A | B | C | D | E | F | |||
| TTG1500 | 200 | 3,300 | 0 to 1-1/8 | 9 | 10.875 | 3.75 | 1.75 | 2.75 | 4 | 12.1 |
| TTG3000 | 350 | 6,600 | 0 to 1-3/8 | 11.125 | 11.625 | 3.125 | 2.125 | 2.875 | 4.5 | 24.3 |
| TTG4500 | 1,000 | 9,900 | 0 to 1-1/2 | 12.375 | 13.25 | 3.5 | 2.375 | 3 | 4.625 | 32 |
| TTG7500 | 1,650 | 16,500 | 0 to 1-3/4 | 14.5 | 15 | 4.375 | 2.5 | 3.625 | 6.625 | 61.7 |
* Refer to product drawing above
You may also like
