Camlok™ HG High Grip Plate Clamp
Product No. HG500
Regular price
$2,305.00 USD
Shipping calculator
Please enter correct zip code
Payment methods
Product details
The Camlok HG High Grip Clamp is designed to provide additional grip forces to products during lifting. The High Grip Clamp has an extra lever in the clamping mechanism, thus asserting a higher gripping force on the plate being lifted. CM’s line of Camlok below-the-hook attachments deliver safe and strong handling of your valuable goods.
- Can be used on hot rolled structural steel plates
- Can be used to lift stainless steel plates or plates with hardened surfaces due to cold rolling
- Smaller jaw range makes these clamps more efficient for lifting thinner steel
- Suitable for hardness up to 371 Brinell (40 HRc)
- Can be used for lifting and turning plates from the horizontal to vertical position or vice versa, through 180º
- Clamp has serrated teeth and will mark plate
- Standard clamp is fitted with a hook ring but can be alternatively supplied with a short length of chain
- Chart Note: *Not Stocked
- Design factor 4:1
| Product Code | Dimensions (in) * | Weight (lbs.) | |||||
| A | B | C | D | E | F | ||
| HG500 | 1.654 | 9.055 | 5.827 | 2.165 | 3.11 | 1.969 | 11 |
| HG1000 | 3.661 | 11.698 | 8.268 | 2.638 | 4.488 | 2.638 | 26.5 |
| HG2000 | 4.331 | 16.378 | 12.008 | 4.016 | 6.26 | 3.15 | 48.5 |
| HG3000 | 4.331 | 16.378 | 12.008 | 4.016 | 6.26 | 3.15 | 59.5 |
| HG4000 | 4.724 | 13.189 | 12.008 | 4.016 | 6.22 | 3.15 | 70.5 |
* Refer to product drawing above
| Product Code | Working Load Limit | Jaw Capacity (in.) | |
| Minimum (lbs) | Maximum (lbs) | ||
| HG500 | 100 | 1,100 | 0 to 3/8 |
| HG1000 | 150 | 2,000 | 0 to 5/8 |
| HG2000 | 450 | 4,400 | 0 to 3/4 |
| HG3000 | 700 | 6,600 | 0 to 3/4 |
| HG4000 | 900 | 8,800 | 0 to 3/4 |