OZ Lifting Galvanized Wire Rope for OBH
OZ Lifting Galvanized Wire Rope for OBH $89.33
  • Wire Rope Replacement for OBH Replacement 98 ft galvanized wire rope for 500 lb Electric Builder’s Hoist
  • Wire Rope Replacement for OBH Replacement 98 ft galvanized wire rope for 1000 lb Electric Builder’s Hoist - imagen 2

OZ Lifting Galvanized Wire Rope for OBH

OZ Lifting |
SKU: OBH500-85
$89.33
Type: 3/16″ x 90′ (500 lb)
  • OBH500: 3/16 in. OBH1000: 1/4 in diameter. 85 ft replacement rope assembly restores the hoist to manufacturer specification.
  • Galvanized finish. Corrosion resistance for construction, industrial, and outdoor lifting environments.
  • Swivel hook with safety latch. Supplied ready to install on the OBH series Electric Builder's Hoist.
  • Genuine OZ Lifting replacement part. Engineered specifically for the OBH500 and OBH1000.
View Full Description Technical Data
amazon_payamerican_expressapple_paydiners_clubdiscovergoogle_paymasterpaypalshopify_payvenmovisa

Often Bought Together

Select items you want to add together

Included
OZ Lifting Galvanized Wire Rope for OBH
Incl. VAT
+
OZ Lifting Jib Arm Mounting Kit for OBH230
Incl. VAT
+
OZ Lifting Geared Beam Trolley with OBH Hanger
Incl. VAT
+
OZ Lifting Hoist Clamp for Manual and Electric Chain Hoists 1000 lb and Under
Incl. VAT
Seleccione el país
Ingrese el código postal correcto
Test heading

OZ Lifting Replacement Galvanized Wire Rope Assembly for OBH Electric Builder's Hoist

The OZ Lifting Galvanized Wire Rope for OBH is a replacement wire rope assembly for the OZ Electric Builder's Hoist series. OBH500-85 is a 3/16-inch diameter assembly for the OBH500, and OBH1000-85 is a 1/4-inch diameter assembly for the OBH1000. Each assembly restores the hoist to manufacturer specification when the original rope shows signs of wear, broken wires, corrosion, or diameter reduction.

Wire rope is a wear component and should be inspected daily before use. Replace immediately if the rope shows broken wires exceeding 10% of total wires, diameter reduction exceeding 7%, kinking, deformation, or corrosion. Always ensure a minimum of five wraps remain on the drum during operation. OBH hoist sold separately.

Key Features

  • OBH500-85: 3/16-inch diameter galvanized wire rope for OBH500
  • OBH1000-85: 1/4-inch diameter galvanized wire rope for OBH1000
  • Galvanized steel construction for corrosion resistance
  • Restores hoist to manufacturer rope specification
  • Wear component — inspect daily before use

Compatible hoist sold separately. Browse the full OZ Lifting collection at MTN Shop.

COMPLETE YOUR SETUP

RELATED PRODUCTS

Explore compatible accessories and related products.

Frequently Asked Questions

When should I replace the wire rope on the OZ Electric Builder's Hoist?
Replace the OZ Lifting OBH wire rope immediately if it shows broken wires exceeding 10% of total wires, a diameter reduction of more than 7%, kinking, deformation, or visible corrosion. Inspect the wire rope daily before each use and discard any rope that fails these criteria.
What is the OZ Lifting Galvanized Wire Rope for OBH used for?
The OZ Lifting Galvanized Wire Rope for OBH is a replacement wire rope assembly for OZ Electric Builder's Hoists. OBH500-85 is designed for the OBH500 and OBH1000-85 for the OBH1000. It restores hoist rope to manufacturer specification when the original rope is worn or damaged.
Are the OBH500-85 and OBH1000-85 wire ropes interchangeable?
No. The OZ Lifting OBH500-85 and OBH1000-85 wire rope assemblies are designed specifically for their respective hoist models and should not be used interchangeably. Using an incorrect rope assembly may affect hoist performance and safety. Always match the rope to the correct hoist model.

You may also like

Recently Viewed

    4.52 ★ (65)
    Verified