Climbtech Removable Concrete Anchor - Multi-Use (.75''/1'')

Climbtech Removable Concrete Anchor

The best-selling ClimbTech’s Removable Concrete Anchors revolutionizes multiple industries with its surprising ease of use, re-usability, versatility, and safety. RAM075N & RAM100N can be inserted in either concrete or rock substrate for climbing and industrial applications such as lifting, hoisting or tie back, and rigging (not for fall protection). 

Use of Climbtech Removable Concrete Anchor

How to Install Concrete Anchors?

1. Drill a 3/4” or 1'' diameter hole at least 3.5” or 4.5''deep.
2. Clean any debris from the hole.
3. When placing anchor, place your thumb inside the anchor loop and your first two fingers around the trigger. Squeeze fingers and thumb together till the trigger and spring fully compress.
4. Insert the anchor into the hole and release the trigger
5. Set the unit with a slight tug on the anchor loop

How to Remove Concrete Anchors?

1. To remove your anchor, place your thumb inside the anchor loop and your first two fingers around the trigger. Squeeze fingers and thumb together until the trigger and spring fully compress.
2. While squeezing the trigger, pull the anchor out of the hole.
3. If the anchor becomes stuck, insert a punch, screwdriver or another object into the hole until it touches the top of the cleaning bushing.
4. Lightly tap with a hammer, making sure the tool is touching the top of the cleaning bushing while squeezing the trigger. The cleaning bushing should be easily visible at the edge of the hole for removal.

This removable concrete anchor is to function as a lift point or other nonlife dependant applications. Before using the anchor, please read the user manual carefully. 

Datasheet & User Manual

FEATURES

• Ease of use – simply drill the proper size hole into your concrete or rock surface, blow the dust out with compressed air, and insert the unit.
• Multi-directional attributes – RB anchors work in horizontal, vertical and overhead surfaces.
• Reusability – when your job is done, simply fill in the drilled hole if necessary and reuse at your new desired location.
• Multi-Industry – ClimbTech’s Removable Anchors can be used for rescue, height access, climbing, and many other applications. 
• Made in the USA

SPECIFICATIONS - RAM075N (For a smaller hole)

• Size: 3/4″
• Breaking Strength: 5,000 lbf / 22kN
• Weight: 0.4-lbs
• Overall Length: 11.5''
• Working Load Limit: 1000-lbs
• Component materials: 
  Main Cable: Aircraft Cable.
  End Termination: Stainless Steel.
  Spoons: Stainless Steel.
  Stop Sleeve: Stainless Steel.
  Trigger: Aluminum.
  Spring: Zinc Plated Steel.
  Swage: Zinc Plated Copper.
  Return Wire: Aircraft Cable.
  Anchor Thimble: Zinc Plated Steel.

SPECIFICATIONS - RAM100N (For a larger hole)

• Size: 1″
• Breaking Strength: 10,000 lbf / 44kN
• Weight: 1-lbs
• Overall Length: 13.75''
• Working Load Limit: 2000-lbs
• Component materials: 
  Main Cable: Aircraft Cable.
  End Termination: Stainless Steel.
  Spoons: Stainless Steel.
  Stop Sleeve: Stainless Steel.
  Trigger: Aluminum.
  Spring: Zinc Plated Steel.
  Swage: Zinc Plated Copper.
  Return Wire: Aircraft Cable.
  Anchor Thimble: Zinc Plated Steel.